#!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# functions used by dracut and other tools.
#
# Copyright 2005-2009 Red Hat, Inc.  All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#

if ! [[ $dracutbasedir ]]; then
    dracutbasedir=${BASH_SOURCE[0]%/*}
    [[ $dracutbasedir = "dracut-functions" ]] && dracutbasedir="."
    [[ $dracutbasedir ]] || dracutbasedir="."
    dracutbasedir="$(readlink -f $dracutbasedir)"
fi

if ! type dinfo >/dev/null 2>&1; then
    . "$dracutbasedir/dracut-logger"
    dlog_init
fi

# Generic substring function.  If $2 is in $1, return 0.
strstr() { [[ $1 =~ $2 ]]; }

# Create all subdirectories for given path without creating the last element.
# $1 = path
mksubdirs() { mkdir -m 0755 -p ${1%/*}; }

# Version comparision function.  Assumes Linux style version scheme.
# $1 = version a
# $2 = comparision op (gt, ge, eq, le, lt, ne)
# $3 = version b
vercmp() {
    local _n1=(${1//./ }) _op=$2 _n2=(${3//./ }) _i _res

    for ((_i=0; ; _i++))
    do
        if [[ ! ${_n1[_i]}${_n2[_i]} ]]; then _res=0
        elif ((${_n1[_i]:-0} > ${_n2[_i]:-0})); then _res=1
        elif ((${_n1[_i]:-0} < ${_n2[_i]:-0})); then _res=2
        else continue
        fi
        break
    done

    case $_op in
        gt) ((_res == 1));;
        ge) ((_res != 2));;
        eq) ((_res == 0));;
        le) ((_res != 1));;
        lt) ((_res == 2));;
        ne) ((_res != 0));;
    esac
}

is_func() {
    [[ $(type -t $1) = "function" ]]
}

# Function prints global variables in format name=value line by line.
# $@ = list of global variables' name
print_vars() {
    local _var _value

    for _var in $@
    do
        _value=$(eval echo \$$_var)
        [[ ${_value} ]] && echo "${_var}=\"${_value}\""
    done
}

get_fs_env() {
    [[ $1 ]] || return
    unset ID_FS_TYPE
    unset ID_FS_UUID
    eval $(udevadm info --query=env --name=$1|egrep 'ID_FS_(TYPE|UUID)=')
    [[ $ID_FS_TYPE ]] && return

    if [[ -x /lib/udev/vol_id ]]; then
        eval $(/lib/udev/vol_id --export $1)
    elif find_binary blkid >/dev/null; then
        eval $(blkid -o udev $1)
    else
        return 1
    fi
}

get_fs_type() (
    [[ $1 ]] || return
    if [[ $1 != ${1#/dev/block/nfs:} ]] \
        || [[ $1 != ${1#/dev/block/nfs3:} ]] \
        || [[ $1 != ${1#/dev/block/nfs4:} ]]; then
        echo "nfs"
        return
    fi
    get_fs_env $1 || return
    echo $ID_FS_TYPE
)

get_fs_uuid() (
    get_fs_env $1 || return
    echo $ID_FS_UUID
)

# finds the major:minor of the block device backing the root filesystem.
find_block_device() {
    local _x _mpt _majmin _dev _fs _maj _min
    if [[ $use_fstab != yes ]]; then
        while read _x _x _majmin _x _mpt _x _x _fs _dev _x; do
            [[ $_fs = nfs ]] && { echo $_dev; return 0;}
            [[ $_fs = nfs3 ]] && { echo $_dev; return 0;}
            [[ $_fs = nfs4 ]] && { echo $_dev; return 0;}
            [[ $_fs = btrfs ]] && {
                ls -nLl "$_dev" | {
                    read _x _x _x _x _maj _min _x
                    _maj=${_maj//,/}
                    echo $_maj:$_min
                } && return 0
            }
            if [[ $_mpt = $1 ]] && [[ ${_majmin#0:} = $_majmin ]]; then
                echo $_majmin
                return 0 # we have a winner!
            fi
        done < /proc/self/mountinfo
    fi
    # fall back to /etc/fstab
    while read _dev _mpt _fs _x; do
        if [[ $_mpt = $1 ]]; then
            [[ $_fs = nfs ]] && { echo $_dev; return 0;}
            [[ $_fs = nfs3 ]] && { echo $_dev; return 0;}
            [[ $_fs = nfs4 ]] && { echo $_dev; return 0;}
            [[ $_dev != ${_dev#UUID=} ]] && _dev=/dev/disk/by-uuid/${_dev#UUID=}
            [[ $_dev != ${_dev#LABEL=} ]] && _dev=/dev/disk/by-label/${_dev#LABEL=}
            [[ -b $_dev ]] || return 1 # oops, not a block device.
            ls -nLl "$_dev" | {
                read _x _x _x _x _maj _min _x
                _maj=${_maj//,/}
                echo $_maj:$_min
            } && return 0
        fi
    done < /etc/fstab

    return 1
}

find_root_block_device() { find_block_device /; }

# Walk all the slave relationships for a given block device.
# Stop when our helper function returns success
# $1 = function to call on every found block device
# $2 = block device in major:minor format
check_block_and_slaves() {
    local _x
    [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry.
    "$1" $2 && return
    check_vol_slaves "$@" && return 0
    if [[ -f /sys/dev/block/$2/../dev ]]; then
        check_block_and_slaves $1 $(cat "/sys/dev/block/$2/../dev") && return 0
    fi
    [[ -d /sys/dev/block/$2/slaves ]] || return 1
    for _x in /sys/dev/block/$2/slaves/*/dev; do
        [[ -f $_x ]] || continue
        check_block_and_slaves $1 $(cat "$_x") && return 0
    done
    return 1
}

get_numeric_dev() {
    local _x _maj _min
    ls -lH "$1" | { read _x _x _x _x _maj _min _x; printf "%d:%d" ${_maj%%,} $_min; }
}

# ugly workaround for the lvm design
# There is no volume group device,
# so, there are no slave devices for volume groups.
# Logical volumes only have the slave devices they really live on,
# but you cannot create the logical volume without the volume group.
# And the volume group might be bigger than the devices the LV needs.
check_vol_slaves() {
    local _lv _vg _pv
    for i in /dev/mapper/*; do
        _lv=$(get_numeric_dev $i)
        if [[ $_lv = $2 ]]; then
            _vg=$(lvm lvs --noheadings -o vg_name $i 2>/dev/null)
            # strip space
            _vg=$(echo $_vg)
            if [[ $_vg ]]; then
                for _pv in $(lvm vgs --noheadings -o pv_name "$_vg" 2>/dev/null)
                do
                    check_block_and_slaves $1 $(get_numeric_dev $_pv) && return 0
                done
            fi
        fi
    done
    return 1
}

# Install a directory, keeping symlinks as on the original system.
# Example: if /lib64 points to /lib on the host, "inst_dir /lib/file"
# will create ${initdir}/lib64, ${initdir}/lib64/file,
# and a symlink ${initdir}/lib -> lib64.
inst_dir() {
    local _dir="$1"
    local _file=""
    local IFS="/"
    local _part
    [[ -e ${initdir}$_dir ]] && return 0

    # iterate over parent directories
    for _part in $_dir; do
        [[ $_part ]] || continue
        _file="$_file/$_part"
        [[ -e ${initdir}$_file ]] && continue

        if [[ -L $_file ]]; then
            # create link as the original
            local target=$(readlink "$_file")
            ln -sfn "$target" "${initdir}$_file" || return 1
            # resolve relative path and recursively install destination
            [[ $target == ${target#/} ]] && target="$(dirname "$_file")/$target"
            inst_dir "$target"
        else
            [[ -h ${initdir}$_file ]] && _file=$(readlink "${initdir}$_file")
            # create directory
            mkdir -m 0755 -p "${initdir}$_file" || return 1
            if [[ -d "$_file" ]]; then
                chmod --reference="$_file" "${initdir}$_file"
                chmod u+w "${initdir}$_file"
            fi
        fi
    done
}

# $1 = file to copy to ramdisk
# $2 (optional) Name for the file on the ramdisk
# Location of the image dir is assumed to be $initdir
# We never overwrite the target if it exists.
inst_simple() {
    local _src target
    [[ -f $1 ]] || return 1
    _src=$1 target="${2:-$1}"
    if ! [[ -d ${initdir}$target ]]; then
        [[ -e ${initdir}$target ]] && return 0
        [[ -h ${initdir}$target ]] && return 0
        inst_dir "${target%/*}"
    fi
    # install checksum files also
    if [[ -e "${_src%/*}/.${_src##*/}.hmac" ]]; then
        inst "${_src%/*}/.${_src##*/}.hmac" "${target%/*}/.${target##*/}.hmac"
    fi
    ddebug "Installing $_src"
    cp -pfL "$_src" "${initdir}$target" 
}

# find symlinks linked to given library file
# $1 = library file
# Function searches for symlinks by stripping version numbers appended to
# library filename, checks if it points to the same target and finally
# prints the list of symlinks to stdout.
#
# Example:
# rev_lib_symlinks libfoo.so.8.1
# output: libfoo.so.8 libfoo.so
# (Only if libfoo.so.8 and libfoo.so exists on host system.)
rev_lib_symlinks() {
    [[ ! $1 ]] && return 0

    local fn="$1" orig="$(readlink -f "$1")" links=''

    [[ ${fn} =~ .*\.so\..* ]] || return 1

    until [[ ${fn##*.} == so ]]; do
        fn="${fn%.*}"
        [[ -L ${fn} && $(readlink -f "${fn}") == ${orig} ]] && links+=" ${fn}"
    done

    echo "${links}"
}

# Same as above, but specialized to handle dynamic libraries.
# It handles making symlinks according to how the original library
# is referenced.
inst_library() {
    local _src=$1 _dest=${2:-$1} _lib _reallib _symlink
    [[ -e $initdir$_dest ]] && return 0
    if [[ -L $_src ]]; then
        # install checksum files also
        if [[ -e "${_src%/*}/.${_src##*/}.hmac" ]]; then
            inst "${_src%/*}/.${_src##*/}.hmac" "${_dest%/*}/.${_dest##*/}.hmac"
        fi
        _reallib=$(readlink -f "$_src")
        _lib=${_src##*/}
        inst_simple "$_reallib" "$_reallib"
        inst_dir "${_dest%/*}"
        (cd "${initdir}${_dest%/*}" && ln -sfn "$_reallib" "$_lib")
    else
        inst_simple "$_src" "$_dest"
    fi

    # Create additional symlinks.  See rev_symlinks description.
    for _symlink in $(rev_lib_symlinks $_src) $(rev_lib_symlinks $_reallib); do
        [[ ! -e $initdir$_symlink ]] && {
            ddebug "Creating extra symlink: $_symlink"
            inst_symlink $_symlink
        }
    done
}

# find a binary.  If we were not passed the full path directly,
# search in the usual places to find the binary.
find_binary() {
    local _binpath="/usr/sbin /sbin /usr/bin /bin" _p
    if [[ -z ${1##/*} ]]; then
        if [[ -x $1 ]] || ldd $1 &>/dev/null; then
            echo $1
            return 0
        fi
    fi
    for _p in $_binpath; do
        [[ -x $_p/$1 ]] && { echo "$_p/$1"; return 0; }
    done
    return 1
}

# Same as above, but specialized to install binary executables.
# Install binary executable, and all shared library dependencies, if any.
inst_binary() {
    local _bin _target _f _self _so_regex _lib_regex _tlibdir _base _file _line

    _bin=$(find_binary "$1") || return 1
    _target=${2:-$_bin}
    inst_symlink $_bin $_target && return 0
    [[ -e $initdir$_target ]] && return 0

    # If the binary being installed is also a library, add it to the loop.
    _so_regex='([^ ]*/lib[^/]*/[^ ]*\.so[^ ]*)'
    [[ $_bin =~ $_so_regex ]] && _self="\t${_bin##*/} => ${_bin} (0x0)\n"

    _lib_regex='^(/lib[^/]*).*'
    # I love bash!
    { LC_ALL=C ldd $_bin 2>/dev/null; echo -en "$_self"; } | while read _line; do
        [[ $_line = 'not a dynamic executable' ]] && return 1
        if [[ $_line =~ not\ found ]]; then
            dfatal "Missing a shared library required by $_bin."
            dfatal "Run \"ldd $_bin\" to find out what it is."
            dfatal "dracut cannot create an initrd."
            exit 1
        fi
        [[ $_line =~ $_so_regex ]] || continue
        _file=${BASH_REMATCH[1]}
        [[ -e ${initdir}$_file ]] && continue

        # See if we are loading an optimized version of a shared lib.
        if [[ $_file =~ $_lib_regex ]]; then
            _tlibdir=${BASH_REMATCH[1]}
            _base=${_file##*/}
            # Prefer nosegneg libs to unoptimized ones.
            for _f in "$_tlibdir/i686/nosegneg" "$_tlibdir"; do
                [[ -e $_f/$_base ]] || continue
                _file=$_f/$_base
                break
            done
            inst_library "$_file" "$_tlibdir/$_base"
        else
            inst_library "$_file"
        fi
    done

    # Install the binary if it wasn't handled in the above loop.
    [[ -z $_self ]] && inst_simple "$_bin" "$_target"
}

# same as above, except for shell scripts.
# If your shell script does not start with shebang, it is not a shell script.
inst_script() {
    [[ -f $1 ]] || return 1
    local _line _shebang_regex
    read -r -n 80 _line <"$1"
    # If debug is set, clean unprintable chars to prevent messing up the term
    [[ $debug ]] && _line=$(echo -n "$_line" | tr -c -d '[:print:][:space:]')
    _shebang_regex='(#! *)(/[^ ]+).*'
    [[ $_line =~ $_shebang_regex ]] || return 1
    inst "${BASH_REMATCH[2]}" && inst_simple "$@"
}

# same as above, but specialized for symlinks
inst_symlink() {
    local _src=$1 _target=$initdir${2:-$1} _realsrc
    [[ -L $1 ]] || return 1
    [[ -L $_target ]] && return 0
    _realsrc=$(readlink -f "$_src")
    [[ $_realsrc = ${_realsrc##*/} ]] && _realsrc=${_src%/*}/$_realsrc
    if [[ -d $_realsrc ]]; then
        inst_dir "$_realsrc"
    else
        inst "$_realsrc" && mkdir -m 0755 -p "${_target%/*}" 
    fi
    if [[ -e "${_src}" ]]; then
        cp -aP "${_src}" "$_target"
    else
        ln -sfn "$_realsrc" "$_target"
    fi
}

# udev rules always get installed in the same place, so
# create a function to install them to make life simpler.
inst_rules() {
    local _target=/etc/udev/rules.d _rule _found

    inst_dir "/lib/udev/rules.d"
    inst_dir "$_target"
    for _rule in "$@"; do
        for r in /lib/udev/rules.d /etc/udev/rules.d; do
            if [[ -f $r/$_rule ]]; then
                _found="$r/$_rule"
                inst_simple "$_found"
            fi
        done
        for r in '' ./ $dracutbasedir/rules.d/; do
            if [[ -f ${r}$_rule ]]; then
                _found="${r}$_rule"
                inst_simple "$_found" "$_target/${_found##*/}"
            fi
        done
        [[ $_found ]] || dinfo "Skipping udev rule: $_rule"
    done
}

# general purpose installation function
# Same args as above.
inst() {
    local _x

    case $# in
        1) ;;
        2) [[ ! $initdir && -d $2 ]] && export initdir=$2
            [[ $initdir = $2 ]] && set $1;;
        3) [[ -z $initdir ]] && export initdir=$2
            set $1 $3;;
        *) dfatal "inst only takes 1 or 2 or 3 arguments"
            exit 1;;
    esac
    for _x in inst_symlink inst_script inst_binary inst_simple; do
        $_x "$@" && return 0
    done
    return 1
}

[[ $hookdirs ]] || {
    hookdirs="cmdline pre-udev pre-trigger netroot initqueue pre-mount"
    hookdirs+=" pre-pivot mount emergency emergency-shutdown shutdown"
    export hookdirs
}

# install function specialized for hooks
# $1 = type of hook, $2 = hook priority (lower runs first), $3 = hook
# All hooks should be POSIX/SuS compliant, they will be sourced by init.
inst_hook() {
    if ! [[ -f $3 ]]; then
        dfatal "Cannot install a hook ($3) that does not exist."
        dfatal "Aborting initrd creation."
        exit 1
    elif ! strstr "$hookdirs" "$1"; then
        dfatal "No such hook type $1. Aborting initrd creation."
        exit 1
    fi
    inst_simple "$3" "/lib/dracut/hooks/${1}/${2}${3##*/}"
}

dracut_install() {
    local _optional=no
    if [[ $1 = '-o' ]]; then
        _optional=yes
        shift
    fi
    while (($# > 0)); do
        if ! inst "$1" ; then
            if [[ $_optional = yes ]]; then
                dwarn "Skipping program $1 as it cannot be found and is" \
                    "flagged to be optional"
            else
                dfatal "Failed to install $1"
                exit 1
            fi
        fi
        shift
    done
}

# install function decompressing the target and handling symlinks
# $@ = list of compressed (gz or bz2) files or symlinks pointing to such files
#
# Function install targets in the same paths inside overlay but decompressed
# and without extensions (.gz, .bz2).
inst_decompress() {
    local _src _dst _realsrc _realdst _cmd

    for _src in $@
    do
        case ${_src} in
            *.gz) _cmd='gzip -d' ;;
            *.bz2) _cmd='bzip2 -d' ;;
            *) return 1 ;;
        esac

        if [[ -L ${_src} ]]
        then
            _realsrc="$(readlink -f ${_src})" # symlink target with extension
            _dst="${_src%.*}" # symlink without extension
            _realdst="${_realsrc%.*}" # symlink target without extension
            mksubdirs "${initdir}/${_src}"
            # Create symlink without extension to target without extension.
            ln -sfn "${_realdst}" "${initdir}/${_dst}"
        fi

        # If the source is symlink we operate on its target.
        [[ ${_realsrc} ]] && _src=${_realsrc}
        inst ${_src}
        # Decompress with chosen tool.  We assume that tool changes name e.g.
        # from 'name.gz' to 'name'.
        ${_cmd} "${initdir}${_src}"
    done
}

# It's similar to above, but if file is not compressed, performs standard
# install.
# $@ = list of files
inst_opt_decompress() {
    local _src

    for _src in $@
    do
        inst_decompress "${_src}" || inst "${_src}"
    done
}

module_check() {
    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
    local _ret
    [[ -d $_moddir ]] || return 1
    if [[ ! -f $_moddir/module-setup.sh ]]; then
        # if we do not have a check script, we are unconditionally included
        [[ -x $_moddir/check ]] || return 0
        $_moddir/check $hostonly
        return $?
    else
        unset check depends install installkernel
        . $_moddir/module-setup.sh
        is_func check || return 0
        check
        _ret=$?
        unset check depends install installkernel
        return $_ret
    fi
}

module_depends() {
    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
    local _ret
    [[ -d $_moddir ]] || return 1
    if [[ ! -f $_moddir/module-setup.sh ]]; then
        # if we do not have a check script, we have no deps
        [[ -x $_moddir/check ]] || return 0
        $_moddir/check -d
        return $?
    else
        unset check depends install installkernel
        . $_moddir/module-setup.sh
        is_func depends || return 0
        depends
        _ret=$?
        unset check depends install installkernel
        return $_ret
    fi
}

module_install() {
    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
    local _ret
    [[ -d $_moddir ]] || return 1
    if [[ ! -f $_moddir/module-setup.sh ]]; then
        [[ -x $_moddir/install ]] && . "$_moddir/install"
        return $?
    else
        unset check depends install installkernel
        . $_moddir/module-setup.sh
        is_func install || return 0
        install
        _ret=$?
        unset check depends install installkernel
        return $_ret
    fi
}

module_installkernel() {
    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
    local _ret
    [[ -d $_moddir ]] || return 1
    if [[ ! -f $_moddir/module-setup.sh ]]; then
        [[ -x $_moddir/installkernel ]] && . "$_moddir/installkernel"
        return $?
    else
        unset check depends install installkernel
        . $_moddir/module-setup.sh
        is_func installkernel || return 0
        installkernel
        _ret=$?
        unset check depends install installkernel
        return $_ret
    fi
}

check_module() {
    local _mod=$1
    local _moddir=$(echo ${dracutbasedir}/modules.d/??${1})
    local _ret
    local _moddep
    # If we are already scheduled to be loaded, no need to check again.
    strstr " $mods_to_load " " $_mod " && return 0
    strstr " $mods_checked_as_dep " " $_mod " && return 1

    # This should never happen, but...
    [[ -d $_moddir ]] || return 1

    [[ $2 ]] || mods_checked_as_dep+=" $_mod "

    strstr " $omit_dracutmodules " " $_mod " && return 1

    if strstr " $dracutmodules $add_dracutmodules " " $_mod "; then
        module_check $_mod; ret=$?
        # explicit module, so also accept ret=255
        [[ $ret = 0 || $ret = 255 ]] || return 1
    else
        # module not in our list
        if [[ $dracutmodules = all ]]; then
            # check, if we can and should install this module
            module_check $_mod || return 1
        else
            # skip this module
            return 1
        fi
    fi

    for _moddep in $(module_depends $_mod); do
        # handle deps as if they were manually added
        strstr " $add_dracutmodules " " $_moddep " || \
            add_dracutmodules+=" $_moddep "
        # if a module we depend on fail, fail also
        check_module $_moddep || return 1
    done

    strstr " $mods_to_load " " $_mod " || \
        mods_to_load+=" $_mod "

    return 0
}

check_module_dir() {
    local _modcheck
    local _mod
    local _moddir
    mods_to_load=""
    for _moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
        _mod=${_moddir##*/}; _mod=${_mod#[0-9][0-9]}
        check_module $_mod 1
    done

    # Report any missing dracut modules, the user has specified
    _modcheck=$add_dracutmodules
    [[ $dracutmodules != all ]] && _modcheck="$m $dracutmodules"
    for _mod in $_modcheck; do
        strstr "$mods_to_load" "$_mod" && continue
        strstr "$omit_dracutmodules" "$_mod" && continue
        derror "Dracut module \"$_mod\" cannot be found."
    done
}

# Install a single kernel module along with any firmware it may require.
# $1 = full path to kernel module to install
install_kmod_with_fw() {
    local _modname=${1##*/} _fwdir _found _fw
    _modname=${_modname%.ko*}
    # no need to go further if the module is already installed
    [[ -e "${initdir}/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" ]] \
        && return 0
    inst_simple "$1" "/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" \
        || return $?
    for _fw in $(modinfo -k $kernel -F firmware $1 2>/dev/null); do
        _found=''
        for _fwdir in $fw_dir; do
            if [[ -d $_fwdir && -f $_fwdir/$_fw ]]; then
                inst_simple "$_fwdir/$_fw" "/lib/firmware/$_fw"
                _found=yes
            fi
        done
        if [[ $_found != yes ]]; then
            if ! grep -qe "\<${_modname//-/_}\>" /proc/modules; then
                dinfo "Possible missing firmware \"${_fw}\" for kernel module" \
                    "\"${_modname}.ko\""
            else
                dwarn "Possible missing firmware \"${_fw}\" for kernel module" \
                    "\"${_modname}.ko\""
            fi
        fi
    done
    return 0
}

# Do something with all the dependencies of a kernel module.
# Note that kernel modules depend on themselves using the technique we use
# $1 = function to call for each dependency we find
#      It will be passed the full path to the found kernel module
# $2 = module to get dependencies for
# rest of args = arguments to modprobe
for_each_kmod_dep() {
    local _func=$1 _kmod=$2 _cmd _modpath _options _found=0
    shift 2
    modprobe "$@" --ignore-install --show-depends $_kmod 2>"$initdir/modprobe.err" | (
        while read _cmd _modpath _options; do
            [[ $_cmd = insmod ]] || continue
            $_func ${_modpath} || exit $?
            _found=1
        done
        [[ $_found -eq 0 ]] && exit 1
        exit 0
    )
    egrep -v 'FATAL: Module .* not found.' "$initdir/modprobe.err" | derror
    rm -f "$initdir/modprobe.err"
    return $?
}

# filter kernel modules to install certain modules that meet specific
# requirements.
# $1 = function to call with module name to filter.
#      This function will be passed the full path to the module to test.
# The behaviour of this function can vary depending on whether $hostonly is set.
# If it is, we will only look at modules that are already in memory.
# If it is not, we will look at all kernel modules
# This function returns the full filenames of modules that match $1
filter_kernel_modules () (
    local _modname _filtercmd
    if ! [[ $hostonly ]]; then
        _filtercmd='find "$srcmods/kernel/drivers" "$srcmods/extra"'
        _filtercmd+=' "$srcmods/weak-updates" -name "*.ko" -o -name "*.ko.gz"'
        _filtercmd+=' 2>/dev/null'
    else
        _filtercmd='cut -d " " -f 1 </proc/modules|xargs modinfo -F filename '
        _filtercmd+='-k $kernel 2>/dev/null'
    fi
    for _modname in $(eval $_filtercmd); do
        case $_modname in
            *.ko) "$1" "$_modname" && echo "$_modname";;
            *.ko.gz) gzip -dc "$_modname" > $initdir/$$.ko
                $1 $initdir/$$.ko && echo "$_modname"
                rm -f $initdir/$$.ko
                ;;
        esac
    done
)

# install kernel modules along with all their dependencies.
instmods() {
    [[ $no_kernel = yes ]] && return
    local _mod _mpargs _moddirname
    local _ret=0
    while (($# > 0)); do
        _mod=${1%.ko*}
        case $_mod in
            =*)
                # This introduces 2 incompatible meanings for =* arguments
                # to instmods.  We need to decide which one to keep.
                if [[ $_mod = =ata && -f $srcmods/modules.block ]]; then
                    instmods $_mpargs \
                        $(egrep 'ata|ahci' "${srcmods}/modules.block")
                elif [ -f $srcmods/modules.${_mod#=} ]; then
                    instmods $_mpargs $(cat ${srcmods}/modules.${_mod#=} )
                else
                    instmods $_mpargs $(find "$srcmods" -path "*/${_mod#=}/*")
                fi
                ;;
            --*)
                _mod=${_mod##*/}
                _mpargs+=" $_mod";;
            i2o_scsi) shift; continue;; # Do not load this diagnostic-only module
            *)  _mod=${_mod##*/}
                # if we are already installed, skip this module and go on
                # to the next one.
                [[ -f $initdir/$1 ]] && { shift; continue; }
                # If we are building a host-specific initramfs and this
                # module is not already loaded, move on to the next one.
                [[ $hostonly ]] && ! grep -qe "\<${_mod//-/_}\>" /proc/modules \
                    && ! echo $add_drivers | grep -qe "\<${_mod}\>" && {
                        shift; continue
                    }

                # We use '-d' option in modprobe only if modules prefix path
                # differs from default '/'.  This allows us to use Dracut with
                # old version of modprobe which doesn't have '-d' option.
                _moddirname=${srcmods%%/lib/modules/*}
                [[ -n ${_moddirname} ]] && _moddirname="-d ${_moddirname}/"

                # ok, load the module, all its dependencies, and any firmware
                # it may require
                for_each_kmod_dep install_kmod_with_fw $_mod \
                    --set-version $kernel ${_moddirname}
                ((_ret+=$?))
                ;;
        esac
        shift
    done
    return $_ret
}
