v27ter_rx_state_t Struct Reference

#include <v27ter_rx.h>

List of all members.

Public Attributes
int	bit_rate
	The bit rate of the modem. Valid values are 2400 and 4800.
put_bit_func_t	put_bit
	The callback function used to put each bit received.
void *	user_data
	A user specified opaque pointer passed to the put_bit routine.
qam_report_handler_t *	qam_report
	A callback function which may be enabled to report every symbol's constellation position.
void *	qam_user_data
	A user specified opaque pointer passed to the qam_report callback routine.
float	rrc_filter [2 *V27TER_RX_FILTER_STEPS]
	The route raised cosine (RRC) pulse shaping filter buffer.
int	rrc_filter_step
	Current offset into the RRC pulse shaping filter buffer.
unsigned int	scramble_reg
	The register for the training and data scrambler.
int	scrambler_pattern_count
	A counter for the number of consecutive bits of repeating pattern through the scrambler.
int	training_stage
	The section of the training data we are currently in.
int	training_bc
int	training_count
float	training_error
int16_t	last_sample
	The value of the last signal sample, using the a simple HPF for signal power estimation.
int	signal_present
	>0 if a signal above the minimum is present. It may or may not be a V.27ter signal.
int	old_train
	TRUE if the previous trained values are to be reused.
uint32_t	carrier_phase
	The current phase of the carrier (i.e. the DDS parameter).
int32_t	carrier_phase_rate
	The update rate for the phase of the carrier (i.e. the DDS increment).
int32_t	carrier_phase_rate_save
	The carrier update rate saved for reuse when using short training.
float	carrier_track_p
float	carrier_track_i
power_meter_t	power
int32_t	carrier_on_power
int32_t	carrier_off_power
float	agc_scaling
float	agc_scaling_save
int	constellation_state
float	eq_delta
complexf_t	eq_coeff [V27TER_EQUALIZER_PRE_LEN+1+V27TER_EQUALIZER_POST_LEN]
	The adaptive equalizer coefficients.
complexf_t	eq_coeff_save [V27TER_EQUALIZER_PRE_LEN+1+V27TER_EQUALIZER_POST_LEN]
complexf_t	eq_buf [V27TER_EQUALIZER_MASK+1]
int	eq_step
	Current offset into equalizer buffer.
int	eq_put_step
int	eq_skip
int	gardner_integrate
	Integration variable for damping the Gardner algorithm tests.
int	gardner_step
	Current step size of Gardner algorithm integration.
int	total_baud_timing_correction
	The total symbol timing correction since the carrier came up. This is only for performance analysis purposes.
int	baud_phase
	The current fractional phase of the baud timing.
int32_t	start_angles [2]
	Starting phase angles for the coarse carrier aquisition step.
int32_t	angles [16]
	History list of phase angles for the coarse carrier aquisition step.
logging_state_t	logging
	Error and flow logging control.

---

Detailed Description

V.27ter modem receive side descriptor. This defines the working state for a single instance of a V.27ter modem receiver.

---

The documentation for this struct was generated from the following file:

• v27ter_rx.h

---