# Makefile.in generated by automake 1.10.1 from Makefile.am.
# src/doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# include $(top_srcdir)/Makefile.paths

VPATH = /builddir/build/BUILD/armagetronad-0.2.8.3.1/bindist-dedicated/../src/doc
pkgdatadir = $(datadir)/armagetronad
pkglibdir = $(libdir)/armagetronad
pkgincludedir = $(includedir)/armagetronad
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = s390x-ibm-linux-gnu
host_triplet = s390x-ibm-linux-gnu
target_triplet = s390x-ibm-linux-gnu
DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/HtmlMakefile \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/html.m4.in
subdir = src/doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/accustomdir.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = Doxyfile html.m4
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(htmldir)"
htmlDATA_INSTALL = $(INSTALL_DATA)
DATA = $(html_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /builddir/build/BUILD/armagetronad-0.2.8.3.1/missing --run aclocal-1.10
AMTAR = ${SHELL} /builddir/build/BUILD/armagetronad-0.2.8.3.1/missing --run tar
APBUILD_CC = 
APBUILD_CXX1 = 
APBUILD_CXX2 = 
APBUILD_STATIC = 
AUTOCONF = ${SHELL} /builddir/build/BUILD/armagetronad-0.2.8.3.1/missing --run autoconf
AUTOHEADER = ${SHELL} /builddir/build/BUILD/armagetronad-0.2.8.3.1/missing --run autoheader
AUTOMAKE = ${SHELL} /builddir/build/BUILD/armagetronad-0.2.8.3.1/missing --run automake-1.10
AWK = gawk
BINRELOC_CFLAGS = 
BINRELOC_LIBS = 
CC = gcc
CCDEPMODE = depmode=none
CFLAGS = -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -march=z9-109 -mtune=z10
CODELEVEL = 0
CPP = gcc -E
CPPFLAGS = -I. -I..  -I/usr/include/libxml2
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=none
CXXFLAGS = -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -march=z9-109 -mtune=z10 -Wno-long-long
CXX_ABI = 
CYGPATH_W = echo
DEBUGLEVEL = 0
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = 
EXEEXT = 
GREP = 
HAVE_BASH = yes
HAVE_GMAKE = yes
HAVE_M4 = true
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LDFLAGS = 
LIBOBJS = 
LIBS = -lm -lxml2 -lz -lm 
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /builddir/build/BUILD/armagetronad-0.2.8.3.1/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
OBJEXT = o
PACKAGE = armagetronad
PACKAGE_BUGREPORT = 
PACKAGE_NAME = Armagetronad
PACKAGE_STRING = Armagetronad 0.2.8.3.1
PACKAGE_TARNAME = armagetronad
PACKAGE_VERSION = 0.2.8.3.1
PATH_SEPARATOR = :
RANLIB = ranlib
SET_MAKE = 
SHELL = /bin/sh
STRIP = 
VERSION = 0.2.8.3.1
XMKMF = 
XML2_CONFIG = xml2-config
X_CFLAGS = 
X_EXTRA_LIBS = 
X_LIBS = 
X_PRE_LIBS = 
ZTHREAD_CONFIG = 
ZTHREAD_CXXFLAGS = 
ZTHREAD_LIBS = 
aa_datadir = ${datadir}${datadir_suffix}${progdir_suffix}
aa_docdir = ${docdir}${docdir_suffix}${progdir_suffix}
aa_infodir = ${infodir}${infodir_suffix}${progdir_suffix}
aa_localstatedir = ${localstatedir}${localstatedir_suffix}${progdir_suffix}
aa_logdir = ${logdir}${logdir_suffix}${progdir_suffix}
aa_mandir = ${mandir}${mandir_suffix}${progdir_suffix}
aa_oldvardir = ${oldvardir}${oldvardir_suffix}${progdir_suffix}
aa_rundir = ${rundir}${rundir_suffix}${progdir_suffix}
aa_sysconfdir = ${sysconfdir}${sysconfdir_suffix}${progdir_suffix}
abs_builddir = /builddir/build/BUILD/armagetronad-0.2.8.3.1/bindist-dedicated/src/doc
abs_srcdir = /builddir/build/BUILD/armagetronad-0.2.8.3.1/bindist-dedicated/../src/doc
abs_top_builddir = /builddir/build/BUILD/armagetronad-0.2.8.3.1/bindist-dedicated
abs_top_srcdir = /builddir/build/BUILD/armagetronad-0.2.8.3.1/bindist-dedicated/..
ac_ct_CC = gcc
ac_ct_CXX = g++
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = /usr/bin
build = s390x-ibm-linux-gnu
build_alias = s390x-redhat-linux-gnu
build_cpu = s390x
build_dedicated = true
build_os = linux-gnu
build_regular = false
build_vendor = ibm
builddir = .
datadir = /usr/share
datadir_suffix = /armacyclesad-dedicated
docdir = ${datadir}/doc
docdir_suffix = /armacyclesad-dedicated
docstyle = unix
enable_desktop = yes
enable_etc = yes
enable_initscripts = yes
enable_migratestate = yes
enable_multiver = no
enable_restoreold = yes
enable_useradd = yes
exec_prefix = /usr
executable_suffix = 
external_uninstall_cmd = 
games_suffix_config = /
games_suffix_data = /
games_suffix_doc = /
games_suffix_var = /
host = s390x-ibm-linux-gnu
host_alias = s390x-redhat-linux-gnu
host_cpu = s390x
host_os = linux-gnu
host_vendor = ibm
includedir = /usr/include
infodir_suffix = /armacyclesad-dedicated
initdir = /etc/init.d
install_sh = $(SHELL) /builddir/build/BUILD/armagetronad-0.2.8.3.1/install-sh
libdir = /usr/lib64
libexecdir = /usr/libexec
localstatedir = /var
localstatedir_suffix = /armacyclesad-dedicated
logdir = ${localstatedir}/log
logdir_suffix = 
mandir_suffix = /armacyclesad-dedicated
mkdir_p = /bin/mkdir -p
needdata = no
oldvardir = ${prefix}/var/armacyclesad-dedicated/var
oldvardir_suffix = 
prefix = /usr
progdir_suffix = 
progname = armacyclesad-dedicated
prognamebase = armacyclesad
program_transform_name = s&^&&
progtitle = Armacycles Advanced
progtitle_server =  Server
progtitle_serverorclient =  Server
relocatable = no
rundir = ${localstatedir}/run
rundir_suffix = 
sbindir = /usr/sbin
scriptdir = ${aa_datadir}/scripts
sharedstatedir = /var/lib
silent_inc = sinclude
srcdir = /builddir/build/BUILD/armagetronad-0.2.8.3.1/bindist-dedicated/../src/doc
sysconfdir = /etc
sysconfdir_suffix = /armacyclesad-dedicated
target = s390x-ibm-linux-gnu
target_alias = 
target_cpu = s390x
target_os = linux-gnu
target_vendor = ibm
top_builddir = ../..
top_srcdir = /builddir/build/BUILD/armagetronad-0.2.8.3.1/bindist-dedicated/..
version = 0.2.8.3.1

# documentation location
armadocdir = ${aa_docdir}

#*********************************************************
#           HTML generation rules: need M4               *
#*********************************************************
htmlm4 = $(top_builddir)/src/doc/html.m4
auto_html_files_m4 = $(wildcard $(srcdir)/*.html.m4)
auto_html_files_m4_dist = $(wildcard $(srcdir)/*.m4)
auto_html_files_here_m4 = $(patsubst $(srcdir)/%.html.m4, %.html, $(auto_html_files_m4) )
auto_html_files_here_processed = $(patsubst $(srcdir)/%.html, %.html, $(auto_html_files_processed) )
auto_html_files = $(sort $(auto_html_files_here_m4) $(auto_html_files_here_processed) ) 
SUBDIRS = net

# almost all possilbe automatically generated HTML files should be considered documentation
doc_html_files = $(filter-out navbar.html head.html, $(auto_html_files))
doc_txt_files = commands.txt COPYING.txt Content_Creation/Howto-Maps.txt
docfiles = $(doc_txt_files) $(doc_html_files)

# install generated html files and put them directly into the distribution
textdir = $(armadocdir)
text_DATE = $(doc_txt_files)
htmldir = $(armadocdir)/html
html_DATA = $(doc_html_files)
all: all-recursive

.SUFFIXES:
.SUFFIXES: .dep .dummy
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(srcdir)/HtmlMakefile $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  src/doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  src/doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
html.m4: $(top_builddir)/config.status $(srcdir)/html.m4.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
install-htmlDATA: $(html_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(html_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(htmlDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
	  $(htmlDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-htmlDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(html_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -f "$(DESTDIR)$(htmldir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-recursive
all-local:
all-am: Makefile $(DATA) all-local
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(htmldir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-htmlDATA

install-dvi: install-dvi-recursive

install-exec-am:

install-html: install-html-recursive

install-info: install-info-recursive

install-man:

install-pdf: install-pdf-recursive

install-ps: install-ps-recursive

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-htmlDATA

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
	install-strip

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am all-local check check-am clean clean-generic \
	clean-local ctags ctags-recursive dist-hook distclean \
	distclean-generic distclean-local distclean-tags distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-htmlDATA install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
	tags-recursive uninstall uninstall-am uninstall-htmlDATA


$(htmlm4): $(top_builddir)/config.status Makefile $(top_srcdir)/src/doc/html.m4.in
	cd ${top_builddir}; ./config.status src/doc/html.m4

%.html : $(srcdir)/%.html.m4 %.html.dep $(htmlm4) Makefile 
	{ echo "define(CHANGEDATE,`date +"%b %d %Y" -r $<`) include($(htmlm4))" ; cat $< ; } | m4 -I ${srcdir} > $@ || cp $< $@
#	{ echo "define(CHANGEDATE,`date +"%b %d %Y"`) include($(htmlm4))" ; cat $< ; } | m4 -I ${srcdir} > $@ || cp $< $@

%.dep: %.m4 Makefile
	echo $*.dep ":\\" > $@
	grep "include(" $< | sed -e "s,include(\(.*\)),$(srcdir)/\1\\\," >> $@
	echo "Makefile" >> $@

.PRECIOUS: %.dep

 sinclude $(wildcard *.dep) .dummy.dep

.dummy.dep:
	echo > $@

htmlclean-local:
	rm -rf *.dep .dummy.dep
	rm -f blubb $(auto_html_files_here_m4)

clean-local: htmlclean-local

htmldist-hook:
	cp ${auto_html_files_m4_dist} ${distfiles} ${distdir}

COPYING.txt:
	cp ${top_srcdir}/COPYING $@

# autogenerate commands.txt from executable
#commands.html.post: commands.html
#	if test "`grep 'Running FAKE' $(srcdir)/commands.txt`" != ""; then touch -t 198001010000 $(srcdir)/commands.txt; fi

#all-local: commands.html.post

$(srcdir)/commands.txt: ${top_srcdir}/language/*
	rm -f $@
	cd $(top_builddir)/src && $(MAKE) armagetronad_main$(EXEEXT) && cd .. && ./src/armagetronad_main$(EXEEXT) --doc 2>&1 | sed -e "s,^\[0\] ,," | grep -v "_help$$" | grep -v "^changed" | grep -v "^Executable path: " | grep -v "^TestPath" | grep -v "^Testing data path: " | grep -v "^Testing configuration path: " | grep -v "^Closing socket" | grep -v "^Locale item" > src/doc/commands.txt || true
	test -r commands.txt || echo "Sorry, command help generation failed." > commands.txt
	test -r $@ || mv commands.txt $@

print:
	echo $(auto_html_files_m4_dist)
distclean-local:
	rm -f COPYING.txt

dist-hook: htmldist-hook ${srcdir}/commands.txt ${doc_html_files}
	cp ${srcdir}/commands.txt $(distdir)
	cp -R ${srcdir}/Content_Creation $(distdir)
	cp -R ${doc_html_files} $(distdir)

# make target for testing documentation without installing
localtest: all Howto-Maps.txt

Howto-Maps.txt:
	ln -s ${srcdir}/Content_Creation/$@ $@
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
