# Makefile.in generated by automake 1.11.1 from Makefile.am.
# docs/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



pkgdatadir = $(datadir)/nut
pkgincludedir = $(includedir)/nut
pkglibdir = $(libdir)/nut
pkglibexecdir = $(libexecdir)/nut
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = powerpc-koji-linux-gnu
host_triplet = powerpc-koji-linux-gnu
target_triplet = powerpc-koji-linux-gnu
subdir = docs
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
	$(top_srcdir)/m4/ax_create_stdint_h.m4 \
	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
	$(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/m4/nut_arg_with.m4 \
	$(top_srcdir)/m4/nut_check_asciidoc.m4 \
	$(top_srcdir)/m4/nut_check_libgd.m4 \
	$(top_srcdir)/m4/nut_check_libhal.m4 \
	$(top_srcdir)/m4/nut_check_libneon.m4 \
	$(top_srcdir)/m4/nut_check_libnetsnmp.m4 \
	$(top_srcdir)/m4/nut_check_libpowerman.m4 \
	$(top_srcdir)/m4/nut_check_libssl.m4 \
	$(top_srcdir)/m4/nut_check_libusb.m4 \
	$(top_srcdir)/m4/nut_check_libwrap.m4 \
	$(top_srcdir)/m4/nut_check_os.m4 \
	$(top_srcdir)/m4/nut_config_libhal.m4 \
	$(top_srcdir)/m4/nut_report_feature.m4 \
	$(top_srcdir)/m4/nut_type_socklen_t.m4 \
	$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/include/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
A2X = none
ACLOCAL = ${SHELL} /builddir/build/BUILD/nut-2.6.0/missing --run aclocal-1.11
AMTAR = ${SHELL} /builddir/build/BUILD/nut-2.6.0/missing --run tar
AR = /usr/bin/ar
ASCIIDOC = none
AUTOCONF = ${SHELL} /builddir/build/BUILD/nut-2.6.0/missing --run autoconf
AUTOHEADER = ${SHELL} /builddir/build/BUILD/nut-2.6.0/missing --run autoheader
AUTOMAKE = ${SHELL} /builddir/build/BUILD/nut-2.6.0/missing --run automake-1.11
AWK = gawk
BINDIR = 
CC = gcc
CCDEPMODE = depmode=none
CFLAGS = -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -Wall -Wsign-compare
CONFPATH = /etc/ups
CPP = gcc -E
CPPFLAGS = 
CYGPATH_W = echo
DBLATEX = 
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DOC_BUILD_LIST = 
DRIVER_BUILD_LIST = all
DRIVER_INSTALL_TARGET = 
DRIVER_MAN_LIST = all
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
FGREP = /bin/grep -F
GREP = /bin/grep
HAL_CALLOUTS_PATH = /usr/libexec
HAL_DEVICE_MATCH_KEY = info.bus
HAL_FDI_PATH = ${prefix}/share/hal/fdi/information/20thirdparty
HAL_USER = haldaemon
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/bin/ld
LDFLAGS = 
LIBGD_CFLAGS = -I/usr/include
LIBGD_LDFLAGS = -L/usr/lib -lgd -lXpm -lX11 -ljpeg -lfontconfig -lfreetype -lpng12 -lz -lm
LIBHAL_CFLAGS = -DDBUS_API_SUBJECT_TO_CHANGE -pthread -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
LIBHAL_LIBS = -pthread -L/lib -lhal -ldbus-glib-1 -ldbus-1 -lpthread -lgobject-2.0 -lgthread-2.0 -lrt -lglib-2.0  
LIBNEON_CFLAGS = -D_LARGEFILE64_SOURCE -DNE_LFS -I/usr/include/neon  
LIBNEON_LIBS = -lneon  
LIBNETSNMP_CFLAGS = -DNETSNMP_ENABLE_IPV6 -fno-strict-aliasing -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -D_RPM_4_4_COMPAT -Ulinux -Dlinux=linux -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/lib/perl5/CORE -I/usr/include
LIBNETSNMP_LIBS = -L/usr/lib -lnetsnmp -lssl -lssl -lcrypto
LIBOBJS = 
LIBPOWERMAN_CFLAGS =  
LIBPOWERMAN_LIBS = -lpowerman  
LIBS = 
LIBSSL_CFLAGS =  
LIBSSL_LIBS = -lssl -lcrypto -ldl -lz  
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBUSB_CFLAGS =  
LIBUSB_LIBS = -L/lib -lusb  
LIBWRAP_CFLAGS = 
LIBWRAP_LIBS = -lnsl  -lwrap
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINFO = ${SHELL} /builddir/build/BUILD/nut-2.6.0/missing --run makeinfo
MANIFEST_TOOL = :
MKDIR_P = /bin/mkdir -p
NETLIBS = 
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OS_NAME = fedora
OTOOL = 
OTOOL64 = 
PACKAGE = nut
PACKAGE_BUGREPORT = 
PACKAGE_NAME = nut
PACKAGE_STRING = nut 2.6.0
PACKAGE_TARNAME = nut
PACKAGE_URL = 
PACKAGE_VERSION = 2.6.0
PATH_SEPARATOR = :
RANLIB = ranlib
RUN_AS_GROUP = dialout
RUN_AS_USER = nut
SED = /bin/sed
SERLIBS = 
SET_MAKE = 
SHELL = /bin/sh
STATEPATH = /var/run/nut
STRIP = strip
SUN_LIBUSB = 
VERSION = 2.6.0
WORDS_BIGENDIAN = 
abs_builddir = /builddir/build/BUILD/nut-2.6.0/docs
abs_srcdir = /builddir/build/BUILD/nut-2.6.0/docs
abs_top_builddir = /builddir/build/BUILD/nut-2.6.0
abs_top_srcdir = /builddir/build/BUILD/nut-2.6.0
ac_ct_AR = 
ac_ct_CC = gcc
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = /usr/bin
build = powerpc-koji-linux-gnu
build_alias = ppc-koji-linux-gnu
build_cpu = powerpc
build_os = linux-gnu
build_vendor = koji
builddir = .
cgiexecdir = /var/www/nut-cgi-bin
datadir = /usr/share/nut
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
driverexecdir = /sbin
dvidir = ${docdir}
exec_prefix = /usr
host = powerpc-koji-linux-gnu
host_alias = ppc-koji-linux-gnu
host_cpu = powerpc
host_os = linux-gnu
host_vendor = koji
hotplugdir = 
htmldir = ${prefix}/html
includedir = /usr/include
infodir = /usr/share/info
install_sh = ${SHELL} /builddir/build/BUILD/nut-2.6.0/install-sh
libdir = /usr/lib
libexecdir = /usr/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
mandir = /usr/share/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgconfigdir = /usr/lib/pkgconfig
prefix = /usr
program_transform_name = s&^&&
psdir = ${docdir}
sbindir = /usr/sbin
sharedstatedir = /var/lib
srcdir = .
sysconfdir = /etc/ups
target = powerpc-koji-linux-gnu
target_alias = 
target_cpu = powerpc
target_os = linux-gnu
target_vendor = koji
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
udevdir = /lib/udev
SHARED_DEPS = nut-names.txt asciidoc.conf
IMAGE_FILES = images/asciidoc.png \
	images/eaton-logo.png \
	images/nut_layering.png \
	images/note.png \
	images/warning.png \
	images/blue-arrow.png \
	images/simple.png \
	images/advanced.png \
	images/bigbox.png \
	images/bizarre.png \
	images/old-cgi.png

USER_MANUAL_DEPS = acknowledgements.txt cables.txt config-notes.txt	\
 configure.txt download.txt documentation.txt features.txt history.txt	\
 outlets.txt scheduling.txt security.txt support.txt user-manual.txt \
 stable-hcl.txt

DEVELOPER_GUIDE_DEPS = contact-closure.txt design.txt developers.txt	\
 developer-guide.txt hid-subdrivers.txt macros.txt \
 new-clients.txt new-drivers.txt net-protocol.txt sock-protocol.txt

CABLES_DEPS = cables/apc-rs500-serial.txt	\
 cables/apc.txt cables/ge-imv-victron.txt cables/imv.txt		\
 cables/mgeups.txt cables/powerware.txt cables/repotec.txt		\
 cables/sms.txt

CABLES_IMAGES = images/cables/73-0724.png images/cables/940-0024C.jpg \
 images/cables/belkin-f6cx-rkm-xu-cable.jpg images/cables/Lansafecable.jpg \
 images/cables/mac-940-0024C.png images/cables/mge-66049.png \
 images/cables/mge-db9-rj12.jpg images/cables/mge-db9-rj45.jpg \
 images/cables/SOLA-330.png

EXTRA_DIST = $(SHARED_DEPS) $(USER_MANUAL_DEPS) $(DEVELOPER_GUIDE_DEPS) \
 $(CABLES_DEPS) FAQ.txt nut-hal.txt nut-qa.txt packager-guide.txt snmp.txt \
 $(IMAGE_FILES) $(CABLES_IMAGES) docinfo.xml

ASCIIDOC_HTML_SINGLE = user-manual.html \
	developer-guide.html \
	packager-guide.html \
	FAQ.html

ASCIIDOC_HTML_CHUNKED = user-manual.chunked \
	developer-guide.chunked \
	packager-guide.chunked \
	FAQ.html

ASCIIDOC_PDF = user-manual.pdf \
	developer-guide.pdf \
	packager-guide.pdf \
	FAQ.pdf


# Force build in ./ and man/ before website 
SUBDIRS = . man website
SUFFIXES = .txt .html .pdf

### TODO: automatic dependency generation
FULL_USER_MANUAL_DEPS = $(USER_MANUAL_DEPS)  $(SHARED_DEPS) ../README \
	../INSTALL cables.txt ../UPGRADING ../TODO

FULL_DEVELOPER_GUIDE_DEPS = $(DEVELOPER_GUIDE_DEPS)  $(SHARED_DEPS) \
	../scripts/augeas/README


# Note: without the "-v", asciidoc (circa 8.6.2) sometimes hangs when
# generating the chunked HTML. In this case, export the environment
# variable ASCIIDOC_VERBOSE to "-v", ie:
#   $ ASCIIDOC_VERBOSE=-v make
A2X_COMMON_OPTS = $(ASCIIDOC_VERBOSE) --attribute icons \
    --attribute localdate=`TZ=UTC date +%Y-%m-%d` \
    --attribute localtime=`TZ=UTC date +%H:%M:%S` \
    --attribute iconsdir=$(srcdir)/images \
    --attribute=badges \
    --attribute=external_title \
    -a toc -a numbered --destination-dir=.

all: all-recursive

.SUFFIXES:
.SUFFIXES: .txt .html .pdf .chunked
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu docs/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
	install-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-generic clean-libtool \
	clean-local ctags ctags-recursive distclean distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am


all: doc

doc: 

pdf: $(ASCIIDOC_PDF)
# also build the HTML manpages with these targets
html-single: $(ASCIIDOC_HTML_SINGLE)
html-chunked: $(ASCIIDOC_HTML_CHUNKED)

#website: html-chunked pdf
website:
	@echo "Not building website documentation since 'asciidoc' was not found."

clean-local:
	rm -rf *.pdf *.html *.chunked docbook-xsl.css

user-manual.html user-manual.chunked user-manual.pdf: $(FULL_USER_MANUAL_DEPS)
developer-guide.html developer-guide.chunked developer-guide.pdf: $(FULL_DEVELOPER_GUIDE_DEPS)
packager-guide.html packager-guide.chunked packager-guide.pdf: packager-guide.txt asciidoc.conf

.txt.html:
	$(A2X) $(A2X_COMMON_OPTS) --attribute=xhtml11_format --format=xhtml $<

.txt.chunked:
	$(A2X) $(A2X_COMMON_OPTS) --attribute=chunked_format --format=chunked $<

.txt.pdf: docinfo.xml
	$(A2X) $(A2X_COMMON_OPTS) --attribute=pdf_format --format=pdf -a docinfo1 $<

.PHONY: html html-single pdf website

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
