chan_console.c

Go to the documentation of this file.

/*
 * Asterisk -- An open source telephony toolkit.
 *
 * Copyright (C) 2006 - 2008, Digium, Inc.
 *
 * Russell Bryant <russell@digium.com>
 *
 * See http://www.asterisk.org for more information about
 * the Asterisk project. Please do not directly contact
 * any of the maintainers of this project for assistance;
 * the project provides a web site, mailing lists and IRC
 * channels for your use.
 *
 * This program is free software, distributed under the terms of
 * the GNU General Public License Version 2. See the LICENSE file
 * at the top of the source tree.
 */

/*! 
 * \file 
 * \brief Cross-platform console channel driver 
 *
 * \author Russell Bryant <russell@digium.com>
 *
 * \note Some of the code in this file came from chan_oss and chan_alsa.
 *       chan_oss,  Mark Spencer <markster@digium.com>
 *       chan_oss,  Luigi Rizzo
 *       chan_alsa, Matthew Fredrickson <creslin@digium.com>
 * 
 * \ingroup channel_drivers
 *
 * \extref Portaudio http://www.portaudio.com/
 *
 * To install portaudio v19 from svn, check it out using the following command:
 *  - svn co https://www.portaudio.com/repos/portaudio/branches/v19-devel
 *
 * \note Since this works with any audio system that libportaudio supports,
 * including ALSA and OSS, this may someday deprecate chan_alsa and chan_oss.
 * However, before that can be done, it needs to *at least* have all of the
 * features that these other channel drivers have.  The features implemented
 * in at least one of the other console channel drivers that are not yet
 * implemented here are:
 *
 * - Set Auto-answer from the dialplan
 * - transfer CLI command
 * - boost CLI command and .conf option
 * - console_video support
 */

/*** MODULEINFO
   <depend>portaudio</depend>
 ***/

#include "asterisk.h"

ASTERISK_FILE_VERSION(__FILE__, "$Revision: 249895 $")

#include <sys/signal.h>  /* SIGURG */

#include <portaudio.h>

#include "asterisk/module.h"
#include "asterisk/channel.h"
#include "asterisk/pbx.h"
#include "asterisk/causes.h"
#include "asterisk/cli.h"
#include "asterisk/musiconhold.h"
#include "asterisk/callerid.h"
#include "asterisk/astobj2.h"

/*! 
 * \brief The sample rate to request from PortAudio 
 *
 * \todo Make this optional.  If this is only going to talk to 8 kHz endpoints,
 *       then it makes sense to use 8 kHz natively.
 */
#define SAMPLE_RATE      16000

/*! 
 * \brief The number of samples to configure the portaudio stream for
 *
 * 320 samples (20 ms) is the most common frame size in Asterisk.  So, the code
 * in this module reads 320 sample frames from the portaudio stream and queues
 * them up on the Asterisk channel.  Frames of any size can be written to a
 * portaudio stream, but the portaudio documentation does say that for high
 * performance applications, the data should be written to Pa_WriteStream in
 * the same size as what is used to initialize the stream.
 */
#define NUM_SAMPLES      320

/*! \brief Mono Input */
#define INPUT_CHANNELS   1

/*! \brief Mono Output */
#define OUTPUT_CHANNELS  1

/*! 
 * \brief Maximum text message length
 * \note This should be changed if there is a common definition somewhere
 *       that defines the maximum length of a text message.
 */
#define TEXT_SIZE 256

/*! \brief Dance, Kirby, Dance! @{ */
#define V_BEGIN " --- <(\"<) --- "
#define V_END   " --- (>\")> ---\n"
/*! @} */

static const char config_file[] = "console.conf";

/*!
 * \brief Console pvt structure
 *
 * Currently, this is a singleton object.  However, multiple instances will be
 * needed when this module is updated for multiple device support.
 */
static struct console_pvt {
   AST_DECLARE_STRING_FIELDS(
      /*! Name of the device */
      AST_STRING_FIELD(name);
      AST_STRING_FIELD(input_device);
      AST_STRING_FIELD(output_device);
      /*! Default context for outgoing calls */
      AST_STRING_FIELD(context);
      /*! Default extension for outgoing calls */
      AST_STRING_FIELD(exten);
      /*! Default CallerID number */
      AST_STRING_FIELD(cid_num);
      /*! Default CallerID name */
      AST_STRING_FIELD(cid_name);
      /*! Default MOH class to listen to, if:
       *    - No MOH class set on the channel
       *    - Peer channel putting this device on hold did not suggest a class */
      AST_STRING_FIELD(mohinterpret);
      /*! Default language */
      AST_STRING_FIELD(language);
      /*! Default parkinglot */
      AST_STRING_FIELD(parkinglot);
   );
   /*! Current channel for this device */
   struct ast_channel *owner;
   /*! Current PortAudio stream for this device */
   PaStream *stream;
   /*! A frame for preparing to queue on to the channel */
   struct ast_frame fr;
   /*! Running = 1, Not running = 0 */
   unsigned int streamstate:1;
   /*! On-hook = 0, Off-hook = 1 */
   unsigned int hookstate:1;
   /*! Unmuted = 0, Muted = 1 */
   unsigned int muted:1;
   /*! Automatically answer incoming calls */
   unsigned int autoanswer:1;
   /*! Ignore context in the console dial CLI command */
   unsigned int overridecontext:1;
   /*! Set during a reload so that we know to destroy this if it is no longer
    *  in the configuration file. */
   unsigned int destroy:1;
   /*! ID for the stream monitor thread */
   pthread_t thread;
} globals;

AST_MUTEX_DEFINE_STATIC(globals_lock);

static struct ao2_container *pvts;
#define NUM_PVT_BUCKETS 7

static struct console_pvt *active_pvt;
AST_RWLOCK_DEFINE_STATIC(active_lock);

/*! 
 * \brief Global jitterbuffer configuration 
 *
 * \note Disabled by default.
 */
static struct ast_jb_conf default_jbconf = {
   .flags = 0,
   .max_size = -1,
   .resync_threshold = -1,
   .impl = "",
   .target_extra = -1,
};
static struct ast_jb_conf global_jbconf;

/*! Channel Technology Callbacks @{ */
static struct ast_channel *console_request(const char *type, int format, 
   void *data, int *cause);
static int console_digit_begin(struct ast_channel *c, char digit);
static int console_digit_end(struct ast_channel *c, char digit, unsigned int duration);
static int console_text(struct ast_channel *c, const char *text);
static int console_hangup(struct ast_channel *c);
static int console_answer(struct ast_channel *c);
static struct ast_frame *console_read(struct ast_channel *chan);
static int console_call(struct ast_channel *c, char *dest, int timeout);
static int console_write(struct ast_channel *chan, struct ast_frame *f);
static int console_indicate(struct ast_channel *chan, int cond, 
   const void *data, size_t datalen);
static int console_fixup(struct ast_channel *oldchan, struct ast_channel *newchan);
/*! @} */

/*!
 * \brief Formats natively supported by this module.
 */
#define SUPPORTED_FORMATS ( AST_FORMAT_SLINEAR16 )

static const struct ast_channel_tech console_tech = {
   .type = "Console",
   .description = "Console Channel Driver",
   .capabilities = SUPPORTED_FORMATS,
   .requester = console_request,
   .send_digit_begin = console_digit_begin,
   .send_digit_end = console_digit_end,
   .send_text = console_text,
   .hangup = console_hangup,
   .answer = console_answer,
   .read = console_read,
   .call = console_call,
   .write = console_write,
   .indicate = console_indicate,
   .fixup = console_fixup,
};

/*! \brief lock a console_pvt struct */
#define console_pvt_lock(pvt) ao2_lock(pvt)

/*! \brief unlock a console_pvt struct */
#define console_pvt_unlock(pvt) ao2_unlock(pvt)

static inline struct console_pvt *ref_pvt(struct console_pvt *pvt)
{
   if (pvt)
      ao2_ref(pvt, +1);
   return pvt;
}

static inline struct console_pvt *unref_pvt(struct console_pvt *pvt)
{
   ao2_ref(pvt, -1);
   return NULL;
}

static struct console_pvt *find_pvt(const char *name)
{
   struct console_pvt tmp_pvt = {
      .name = name,
   };

   return ao2_find(pvts, &tmp_pvt, OBJ_POINTER);
}

/*!
 * \brief Stream monitor thread 
 *
 * \arg data A pointer to the console_pvt structure that contains the portaudio
 *      stream that needs to be monitored.
 *
 * This function runs in its own thread to monitor data coming in from a
 * portaudio stream.  When enough data is available, it is queued up to
 * be read from the Asterisk channel.
 */
static void *stream_monitor(void *data)
{
   struct console_pvt *pvt = data;
   char buf[NUM_SAMPLES * sizeof(int16_t)];
   PaError res;
   struct ast_frame f = {
      .frametype = AST_FRAME_VOICE,
      .subclass = AST_FORMAT_SLINEAR16,
      .src = "console_stream_monitor",
      .data.ptr = buf,
      .datalen = sizeof(buf),
      .samples = sizeof(buf) / sizeof(int16_t),
   };

   for (;;) {
      pthread_testcancel();
      res = Pa_ReadStream(pvt->stream, buf, sizeof(buf) / sizeof(int16_t));
      pthread_testcancel();

      if (res == paNoError)
         ast_queue_frame(pvt->owner, &f);
   }

   return NULL;
}

static int open_stream(struct console_pvt *pvt)
{
   int res = paInternalError;

   if (!strcasecmp(pvt->input_device, "default") && 
      !strcasecmp(pvt->output_device, "default")) {
      res = Pa_OpenDefaultStream(&pvt->stream, INPUT_CHANNELS, OUTPUT_CHANNELS, 
         paInt16, SAMPLE_RATE, NUM_SAMPLES, NULL, NULL);
   } else {
      PaStreamParameters input_params = { 
         .channelCount = 1,
         .sampleFormat = paInt16,
         .suggestedLatency = (1.0 / 50.0), /* 20 ms */
         .device = paNoDevice,
      };
      PaStreamParameters output_params = { 
         .channelCount = 1, 
         .sampleFormat = paInt16,
         .suggestedLatency = (1.0 / 50.0), /* 20 ms */
         .device = paNoDevice,
      };
      PaDeviceIndex idx, num_devices, def_input, def_output;

      if (!(num_devices = Pa_GetDeviceCount()))
         return res;

      def_input = Pa_GetDefaultInputDevice();
      def_output = Pa_GetDefaultOutputDevice();

      for (idx = 0; 
         idx < num_devices && (input_params.device == paNoDevice 
            || output_params.device == paNoDevice); 
         idx++) 
      {
         const PaDeviceInfo *dev = Pa_GetDeviceInfo(idx);

         if (dev->maxInputChannels) {
            if ( (idx == def_input && !strcasecmp(pvt->input_device, "default")) ||
               !strcasecmp(pvt->input_device, dev->name) )
               input_params.device = idx;
         }

         if (dev->maxOutputChannels) {
            if ( (idx == def_output && !strcasecmp(pvt->output_device, "default")) ||
               !strcasecmp(pvt->output_device, dev->name) )
               output_params.device = idx;
         }
      }

      if (input_params.device == paNoDevice)
         ast_log(LOG_ERROR, "No input device found for console device '%s'\n", pvt->name);
      if (output_params.device == paNoDevice)
         ast_log(LOG_ERROR, "No output device found for console device '%s'\n", pvt->name);

      res = Pa_OpenStream(&pvt->stream, &input_params, &output_params,
         SAMPLE_RATE, NUM_SAMPLES, paNoFlag, NULL, NULL);
   }

   return res;
}

static int start_stream(struct console_pvt *pvt)
{
   PaError res;
   int ret_val = 0;

   console_pvt_lock(pvt);

   if (pvt->streamstate)
      goto return_unlock;

   pvt->streamstate = 1;
   ast_debug(1, "Starting stream\n");

   res = open_stream(pvt);
   if (res != paNoError) {
      ast_log(LOG_WARNING, "Failed to open stream - (%d) %s\n",
         res, Pa_GetErrorText(res));
      ret_val = -1;
      goto return_unlock;
   }

   res = Pa_StartStream(pvt->stream);
   if (res != paNoError) {
      ast_log(LOG_WARNING, "Failed to start stream - (%d) %s\n",
         res, Pa_GetErrorText(res));
      ret_val = -1;
      goto return_unlock;
   }

   if (ast_pthread_create_background(&pvt->thread, NULL, stream_monitor, pvt)) {
      ast_log(LOG_ERROR, "Failed to start stream monitor thread\n");
      ret_val = -1;
   }

return_unlock:
   console_pvt_unlock(pvt);

   return ret_val;
}

static int stop_stream(struct console_pvt *pvt)
{
   if (!pvt->streamstate || pvt->thread == AST_PTHREADT_NULL)
      return 0;

   pthread_cancel(pvt->thread);
   pthread_kill(pvt->thread, SIGURG);
   pthread_join(pvt->thread, NULL);

   console_pvt_lock(pvt);
   Pa_AbortStream(pvt->stream);
   Pa_CloseStream(pvt->stream);
   pvt->stream = NULL;
   pvt->streamstate = 0;
   console_pvt_unlock(pvt);

   return 0;
}

/*!
 * \note Called with the pvt struct locked
 */
static struct ast_channel *console_new(struct console_pvt *pvt, const char *ext, const char *ctx, int state)
{
   struct ast_channel *chan;

   if (!(chan = ast_channel_alloc(1, state, pvt->cid_num, pvt->cid_name, NULL, 
      ext, ctx, 0, "Console/%s", pvt->name))) {
      return NULL;
   }

   chan->tech = &console_tech;
   chan->nativeformats = AST_FORMAT_SLINEAR16;
   chan->readformat = AST_FORMAT_SLINEAR16;
   chan->writeformat = AST_FORMAT_SLINEAR16;
   chan->tech_pvt = ref_pvt(pvt);

   pvt->owner = chan;

   if (!ast_strlen_zero(pvt->language))
      ast_string_field_set(chan, language, pvt->language);

   ast_jb_configure(chan, &global_jbconf);

   if (state != AST_STATE_DOWN) {
      if (ast_pbx_start(chan)) {
         chan->hangupcause = AST_CAUSE_SWITCH_CONGESTION;
         ast_hangup(chan);
         chan = NULL;
      } else
         start_stream(pvt);
   }

   return chan;
}

static struct ast_channel *console_request(const char *type, int format, void *data, int *cause)
{
   int oldformat = format;
   struct ast_channel *chan = NULL;
   struct console_pvt *pvt;

   if (!(pvt = find_pvt(data))) {
      ast_log(LOG_ERROR, "Console device '%s' not found\n", (char *) data);
      return NULL;
   }

   format &= SUPPORTED_FORMATS;
   if (!format) {
      ast_log(LOG_NOTICE, "Channel requested with unsupported format(s): '%d'\n", oldformat);
      goto return_unref;
   }

   if (pvt->owner) {
      ast_log(LOG_NOTICE, "Console channel already active!\n");
      *cause = AST_CAUSE_BUSY;
      goto return_unref;
   }

   console_pvt_lock(pvt);
   chan = console_new(pvt, NULL, NULL, AST_STATE_DOWN);
   console_pvt_unlock(pvt);

   if (!chan)
      ast_log(LOG_WARNING, "Unable to create new Console channel!\n");

return_unref:
   unref_pvt(pvt);

   return chan;
}

static int console_digit_begin(struct ast_channel *c, char digit)
{
   ast_verb(1, V_BEGIN "Console Received Beginning of Digit %c" V_END, digit);

   return -1; /* non-zero to request inband audio */
}

static int console_digit_end(struct ast_channel *c, char digit, unsigned int duration)
{
   ast_verb(1, V_BEGIN "Console Received End of Digit %c (duration %u)" V_END, 
      digit, duration);

   return -1; /* non-zero to request inband audio */
}

static int console_text(struct ast_channel *c, const char *text)
{
   ast_verb(1, V_BEGIN "Console Received Text '%s'" V_END, text);

   return 0;
}

static int console_hangup(struct ast_channel *c)
{
   struct console_pvt *pvt = c->tech_pvt;

   ast_verb(1, V_BEGIN "Hangup on Console" V_END);

   pvt->hookstate = 0;
   pvt->owner = NULL;
   stop_stream(pvt);

   c->tech_pvt = unref_pvt(pvt);

   return 0;
}

static int console_answer(struct ast_channel *c)
{
   struct console_pvt *pvt = c->tech_pvt;

   ast_verb(1, V_BEGIN "Call from Console has been Answered" V_END);

   ast_setstate(c, AST_STATE_UP);

   return start_stream(pvt);
}

/*
 * \brief Implementation of the ast_channel_tech read() callback
 *
 * Calling this function is harmless.  However, if it does get called, it
 * is an indication that something weird happened that really shouldn't
 * have and is worth looking into.
 * 
 * Why should this function not get called?  Well, let me explain.  There are
 * a couple of ways to pass on audio that has come from this channel.  The way
 * that this channel driver uses is that once the audio is available, it is
 * wrapped in an ast_frame and queued onto the channel using ast_queue_frame().
 *
 * The other method would be signalling to the core that there is audio waiting,
 * and that it needs to call the channel's read() callback to get it.  The way
 * the channel gets signalled is that one or more file descriptors are placed
 * in the fds array on the ast_channel which the core will poll() on.  When the
 * fd indicates that input is available, the read() callback is called.  This
 * is especially useful when there is a dedicated file descriptor where the
 * audio is read from.  An example would be the socket for an RTP stream.
 */
static struct ast_frame *console_read(struct ast_channel *chan)
{
   ast_debug(1, "I should not be called ...\n");

   return &ast_null_frame;
}

static int console_call(struct ast_channel *c, char *dest, int timeout)
{
   struct ast_frame f = { 0, };
   struct console_pvt *pvt = c->tech_pvt;

   ast_verb(1, V_BEGIN "Call to device '%s' on console from '%s' <%s>" V_END,
      dest, c->cid.cid_name, c->cid.cid_num);

   console_pvt_lock(pvt);

   if (pvt->autoanswer) {
      pvt->hookstate = 1;
      console_pvt_unlock(pvt);
      ast_verb(1, V_BEGIN "Auto-answered" V_END);
      f.frametype = AST_FRAME_CONTROL;
      f.subclass = AST_CONTROL_ANSWER;
   } else {
      console_pvt_unlock(pvt);
      ast_verb(1, V_BEGIN "Type 'console answer' to answer, or use the 'autoanswer' option "
            "for future calls" V_END);
      f.frametype = AST_FRAME_CONTROL;
      f.subclass = AST_CONTROL_RINGING;
      ast_indicate(c, AST_CONTROL_RINGING);
   }

   ast_queue_frame(c, &f);

   return start_stream(pvt);
}

static int console_write(struct ast_channel *chan, struct ast_frame *f)
{
   struct console_pvt *pvt = chan->tech_pvt;

   Pa_WriteStream(pvt->stream, f->data.ptr, f->samples);

   return 0;
}

static int console_indicate(struct ast_channel *chan, int cond, const void *data, size_t datalen)
{
   struct console_pvt *pvt = chan->tech_pvt;
   int res = 0;

   switch (cond) {
   case AST_CONTROL_BUSY:
   case AST_CONTROL_CONGESTION:
   case AST_CONTROL_RINGING:
   case -1:
      res = -1;  /* Ask for inband indications */
      break;
   case AST_CONTROL_PROGRESS:
   case AST_CONTROL_PROCEEDING:
   case AST_CONTROL_VIDUPDATE:
   case AST_CONTROL_SRCUPDATE:
      break;
   case AST_CONTROL_HOLD:
      ast_verb(1, V_BEGIN "Console Has Been Placed on Hold" V_END);
      ast_moh_start(chan, data, pvt->mohinterpret);
      break;
   case AST_CONTROL_UNHOLD:
      ast_verb(1, V_BEGIN "Console Has Been Retrieved from Hold" V_END);
      ast_moh_stop(chan);
      break;
   default:
      ast_log(LOG_WARNING, "Don't know how to display condition %d on %s\n", 
         cond, chan->name);
      /* The core will play inband indications for us if appropriate */
      res = -1;
   }

   return res;
}

static int console_fixup(struct ast_channel *oldchan, struct ast_channel *newchan)
{
   struct console_pvt *pvt = newchan->tech_pvt;

   pvt->owner = newchan;

   return 0;
}

/*!
 * split a string in extension-context, returns pointers to malloc'ed
 * strings.
 * If we do not have 'overridecontext' then the last @ is considered as
 * a context separator, and the context is overridden.
 * This is usually not very necessary as you can play with the dialplan,
 * and it is nice not to need it because you have '@' in SIP addresses.
 * Return value is the buffer address.
 *
 * \note came from chan_oss
 */
static char *ast_ext_ctx(struct console_pvt *pvt, const char *src, char **ext, char **ctx)
{
   if (ext == NULL || ctx == NULL)
      return NULL;         /* error */

   *ext = *ctx = NULL;

   if (src && *src != '\0')
      *ext = ast_strdup(src);

   if (*ext == NULL)
      return NULL;

   if (!pvt->overridecontext) {
      /* parse from the right */
      *ctx = strrchr(*ext, '@');
      if (*ctx)
         *(*ctx)++ = '\0';
   }

   return *ext;
}

static struct console_pvt *get_active_pvt(void)
{
   struct console_pvt *pvt;

   ast_rwlock_rdlock(&active_lock);
   pvt = ref_pvt(active_pvt); 
   ast_rwlock_unlock(&active_lock);

   return pvt;
}

static char *cli_console_autoanswer(struct ast_cli_entry *e, int cmd, 
   struct ast_cli_args *a)
{
   struct console_pvt *pvt = get_active_pvt();
   char *res = CLI_SUCCESS;

   switch (cmd) {
   case CLI_INIT:
      e->command = "console {set|show} autoanswer [on|off]";
      e->usage =
         "Usage: console {set|show} autoanswer [on|off]\n"
         "       Enables or disables autoanswer feature.  If used without\n"
         "       argument, displays the current on/off status of autoanswer.\n"
         "       The default value of autoanswer is in 'oss.conf'.\n";
      return NULL;

   case CLI_GENERATE:
      return NULL;
   }

   if (!pvt) {
      ast_cli(a->fd, "No console device is set as active.\n");
      return CLI_FAILURE;
   }

   if (a->argc == e->args - 1) {
      ast_cli(a->fd, "Auto answer is %s.\n", pvt->autoanswer ? "on" : "off");
      unref_pvt(pvt);
      return CLI_SUCCESS;
   }

   if (a->argc != e->args) {
      unref_pvt(pvt);
      return CLI_SHOWUSAGE;
   }

   if (!strcasecmp(a->argv[e->args-1], "on"))
      pvt->autoanswer = 1;
   else if (!strcasecmp(a->argv[e->args - 1], "off"))
      pvt->autoanswer = 0;
   else
      res = CLI_SHOWUSAGE;

   unref_pvt(pvt);

   return CLI_SUCCESS;
}

static char *cli_console_flash(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
   struct ast_frame f = { AST_FRAME_CONTROL, AST_CONTROL_FLASH };
   struct console_pvt *pvt = get_active_pvt();

   if (cmd == CLI_INIT) {
      e->command = "console flash";
      e->usage =
         "Usage: console flash\n"
         "       Flashes the call currently placed on the console.\n";
      return NULL;
   } else if (cmd == CLI_GENERATE)
      return NULL;

   if (!pvt) {
      ast_cli(a->fd, "No console device is set as active\n");
      return CLI_FAILURE;
   }

   if (a->argc != e->args)
      return CLI_SHOWUSAGE;

   if (!pvt->owner) {
      ast_cli(a->fd, "No call to flash\n");
      unref_pvt(pvt);
      return CLI_FAILURE;
   }

   pvt->hookstate = 0;

   ast_queue_frame(pvt->owner, &f);

   unref_pvt(pvt);

   return CLI_SUCCESS;
}

static char *cli_console_dial(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
   char *s = NULL;
   const char *mye = NULL, *myc = NULL; 
   struct console_pvt *pvt = get_active_pvt();

   if (cmd == CLI_INIT) {
      e->command = "console dial";
      e->usage =
         "Usage: console dial [extension[@context]]\n"
         "       Dials a given extension (and context if specified)\n";
      return NULL;
   } else if (cmd == CLI_GENERATE)
      return NULL;

   if (!pvt) {
      ast_cli(a->fd, "No console device is currently set as active\n");
      return CLI_FAILURE;
   }
   
   if (a->argc > e->args + 1)
      return CLI_SHOWUSAGE;

   if (pvt->owner) { /* already in a call */
      int i;
      struct ast_frame f = { AST_FRAME_DTMF, 0 };

      if (a->argc == e->args) {  /* argument is mandatory here */
         ast_cli(a->fd, "Already in a call. You can only dial digits until you hangup.\n");
         unref_pvt(pvt);
         return CLI_FAILURE;
      }
      s = a->argv[e->args];
      /* send the string one char at a time */
      for (i = 0; i < strlen(s); i++) {
         f.subclass = s[i];
         ast_queue_frame(pvt->owner, &f);
      }
      unref_pvt(pvt);
      return CLI_SUCCESS;
   }

   /* if we have an argument split it into extension and context */
   if (a->argc == e->args + 1) {
      char *ext = NULL, *con = NULL;
      s = ast_ext_ctx(pvt, a->argv[e->args], &ext, &con);
      ast_debug(1, "provided '%s', exten '%s' context '%s'\n", 
         a->argv[e->args], mye, myc);
      mye = ext;
      myc = con;
   }

   /* supply default values if needed */
   if (ast_strlen_zero(mye))
      mye = pvt->exten;
   if (ast_strlen_zero(myc))
      myc = pvt->context;

   if (ast_exists_extension(NULL, myc, mye, 1, NULL)) {
      console_pvt_lock(pvt);
      pvt->hookstate = 1;
      console_new(pvt, mye, myc, AST_STATE_RINGING);
      console_pvt_unlock(pvt);
   } else
      ast_cli(a->fd, "No such extension '%s' in context '%s'\n", mye, myc);

   if (s)
      free(s);

   unref_pvt(pvt);

   return CLI_SUCCESS;
}

static char *cli_console_hangup(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
   struct console_pvt *pvt = get_active_pvt();

   if (cmd == CLI_INIT) {
      e->command = "console hangup";
      e->usage =
         "Usage: console hangup\n"
         "       Hangs up any call currently placed on the console.\n";
      return NULL;
   } else if (cmd == CLI_GENERATE)
      return NULL;

   if (!pvt) {
      ast_cli(a->fd, "No console device is set as active\n");
      return CLI_FAILURE;
   }
   
   if (a->argc != e->args)
      return CLI_SHOWUSAGE;

   if (!pvt->owner && !pvt->hookstate) {
      ast_cli(a->fd, "No call to hang up\n");
      unref_pvt(pvt);
      return CLI_FAILURE;
   }

   pvt->hookstate = 0;
   if (pvt->owner)
      ast_queue_hangup(pvt->owner);

   unref_pvt(pvt);

   return CLI_SUCCESS;
}

static char *cli_console_mute(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
   char *s;
   struct console_pvt *pvt = get_active_pvt();
   char *res = CLI_SUCCESS;

   if (cmd == CLI_INIT) {
      e->command = "console {mute|unmute}";
      e->usage =
         "Usage: console {mute|unmute}\n"
         "       Mute/unmute the microphone.\n";
      return NULL;
   } else if (cmd == CLI_GENERATE)
      return NULL;

   if (!pvt) {
      ast_cli(a->fd, "No console device is set as active\n");
      return CLI_FAILURE;
   }

   if (a->argc != e->args)
      return CLI_SHOWUSAGE;

   s = a->argv[e->args-1];
   if (!strcasecmp(s, "mute"))
      pvt->muted = 1;
   else if (!strcasecmp(s, "unmute"))
      pvt->muted = 0;
   else
      res = CLI_SHOWUSAGE;

   ast_verb(1, V_BEGIN "The Console is now %s" V_END, 
      pvt->muted ? "Muted" : "Unmuted");

   unref_pvt(pvt);

   return res;
}

static char *cli_list_available(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
   PaDeviceIndex idx, num, def_input, def_output;

   if (cmd == CLI_INIT) {
      e->command = "console list available";
      e->usage =
         "Usage: console list available\n"
         "       List all available devices.\n";
      return NULL;
   } else if (cmd == CLI_GENERATE)
      return NULL;

   if (a->argc != e->args)
      return CLI_SHOWUSAGE;

   ast_cli(a->fd, "\n"
               "=============================================================\n"
               "=== Available Devices =======================================\n"
               "=============================================================\n"
               "===\n");

   num = Pa_GetDeviceCount();
   if (!num) {
      ast_cli(a->fd, "(None)\n");
      return CLI_SUCCESS;
   }

   def_input = Pa_GetDefaultInputDevice();
   def_output = Pa_GetDefaultOutputDevice();
   for (idx = 0; idx < num; idx++) {
      const PaDeviceInfo *dev = Pa_GetDeviceInfo(idx);
      if (!dev)
         continue;
      ast_cli(a->fd, "=== ---------------------------------------------------------\n"
                     "=== Device Name: %s\n", dev->name);
      if (dev->maxInputChannels)
         ast_cli(a->fd, "=== ---> %sInput Device\n", (idx == def_input) ? "Default " : "");
      if (dev->maxOutputChannels)
         ast_cli(a->fd, "=== ---> %sOutput Device\n", (idx == def_output) ? "Default " : "");
      ast_cli(a->fd, "=== ---------------------------------------------------------\n===\n");
   }

   ast_cli(a->fd, "=============================================================\n\n");

   return CLI_SUCCESS;
}

static char *cli_list_devices(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
   struct ao2_iterator i;
   struct console_pvt *pvt;

   if (cmd == CLI_INIT) {
      e->command = "console list devices";
      e->usage =
         "Usage: console list devices\n"
         "       List all configured devices.\n";
      return NULL;
   } else if (cmd == CLI_GENERATE)
      return NULL;

   if (a->argc != e->args)
      return CLI_SHOWUSAGE;

   ast_cli(a->fd, "\n"
               "=============================================================\n"
               "=== Configured Devices ======================================\n"
               "=============================================================\n"
               "===\n");

   i = ao2_iterator_init(pvts, 0);
   while ((pvt = ao2_iterator_next(&i))) {
      console_pvt_lock(pvt);

      ast_cli(a->fd, "=== ---------------------------------------------------------\n"
                     "=== Device Name: %s\n"
                     "=== ---> Active:           %s\n"
                     "=== ---> Input Device:     %s\n"
                     "=== ---> Output Device:    %s\n"
                     "=== ---> Context:          %s\n"
                     "=== ---> Extension:        %s\n"
                     "=== ---> CallerID Num:     %s\n"
                     "=== ---> CallerID Name:    %s\n"
                     "=== ---> MOH Interpret:    %s\n"
                     "=== ---> Language:         %s\n"
                     "=== ---> Parkinglot:       %s\n"
                     "=== ---> Muted:            %s\n"
                     "=== ---> Auto-Answer:      %s\n"
                     "=== ---> Override Context: %s\n"
                     "=== ---------------------------------------------------------\n===\n",
         pvt->name, (pvt == active_pvt) ? "Yes" : "No",
         pvt->input_device, pvt->output_device, pvt->context,
         pvt->exten, pvt->cid_num, pvt->cid_name, pvt->mohinterpret,
         pvt->language, pvt->parkinglot, pvt->muted ? "Yes" : "No", pvt->autoanswer ? "Yes" : "No",
         pvt->overridecontext ? "Yes" : "No");

      console_pvt_unlock(pvt);
      unref_pvt(pvt);
   }
   ao2_iterator_destroy(&i);

   ast_cli(a->fd, "=============================================================\n\n");

   return CLI_SUCCESS;
}
/*!
 * \brief answer command from the console
 */
static char *cli_console_answer(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
   struct ast_frame f = { AST_FRAME_CONTROL, AST_CONTROL_ANSWER };
   struct console_pvt *pvt = get_active_pvt();

   switch (cmd) {
   case CLI_INIT:
      e->command = "console answer";
      e->usage =
         "Usage: console answer\n"
         "       Answers an incoming call on the console channel.\n";
      return NULL;

   case CLI_GENERATE:
      return NULL;   /* no completion */
   }

   if (!pvt) {
      ast_cli(a->fd, "No console device is set as active\n");
      return CLI_FAILURE;
   }

   if (a->argc != e->args) {
      unref_pvt(pvt);
      return CLI_SHOWUSAGE;
   }

   if (!pvt->owner) {
      ast_cli(a->fd, "No one is calling us\n");
      unref_pvt(pvt);
      return CLI_FAILURE;
   }

   pvt->hookstate = 1;

   ast_indicate(pvt->owner, -1);

   ast_queue_frame(pvt->owner, &f);

   unref_pvt(pvt);

   return CLI_SUCCESS;
}

/*!
 * \brief Console send text CLI command
 *
 * \note concatenate all arguments into a single string. argv is NULL-terminated
 * so we can use it right away
 */
static char *cli_console_sendtext(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
   char buf[TEXT_SIZE];
   struct console_pvt *pvt = get_active_pvt();
   struct ast_frame f = {
      .frametype = AST_FRAME_TEXT,
      .data.ptr = buf,
      .src = "console_send_text",
   };
   int len;

   if (cmd == CLI_INIT) {
      e->command = "console send text";
      e->usage =
         "Usage: console send text <message>\n"
         "       Sends a text message for display on the remote terminal.\n";
      return NULL;
   } else if (cmd == CLI_GENERATE)
      return NULL;

   if (!pvt) {
      ast_cli(a->fd, "No console device is set as active\n");
      return CLI_FAILURE;
   }

   if (a->argc < e->args + 1) {
      unref_pvt(pvt);
      return CLI_SHOWUSAGE;
   }

   if (!pvt->owner) {
      ast_cli(a->fd, "Not in a call\n");
      unref_pvt(pvt);
      return CLI_FAILURE;
   }

   ast_join(buf, sizeof(buf) - 1, a->argv + e->args);
   if (ast_strlen_zero(buf)) {
      unref_pvt(pvt);
      return CLI_SHOWUSAGE;
   }

   len = strlen(buf);
   buf[len] = '\n';
   f.datalen = len + 1;

   ast_queue_frame(pvt->owner, &f);

   unref_pvt(pvt);

   return CLI_SUCCESS;
}

static void set_active(struct console_pvt *pvt, const char *value)
{
   if (pvt == &globals) {
      ast_log(LOG_ERROR, "active is only valid as a per-device setting\n");
      return;
   }

   if (!ast_true(value))
      return;

   ast_rwlock_wrlock(&active_lock);
   if (active_pvt)
      unref_pvt(active_pvt);
   active_pvt = ref_pvt(pvt);
   ast_rwlock_unlock(&active_lock);
}

static char *cli_console_active(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
   struct console_pvt *pvt;

   switch (cmd) {
   case CLI_INIT:
      e->command = "console {set|show} active [<device>]";
      e->usage =
         "Usage: console {set|show} active [<device>]\n"
         "       Set or show the active console device for the Asterisk CLI.\n";
      return NULL;
   case CLI_GENERATE:
      if (a->pos == e->args) {
         struct ao2_iterator i;
         int x = 0;
         char *res = NULL;
         i = ao2_iterator_init(pvts, 0);
         while ((pvt = ao2_iterator_next(&i))) {
            if (++x > a->n && !strncasecmp(pvt->name, a->word, strlen(a->word)))
               res = ast_strdup(pvt->name);
            unref_pvt(pvt);
            if (res) {
               ao2_iterator_destroy(&i);
               return res;
            }
         }
         ao2_iterator_destroy(&i);
      }
      return NULL;
   }

   if (a->argc < e->args)
      return CLI_SHOWUSAGE;

   if (a->argc == 3) {
      pvt = get_active_pvt();

      if (!pvt)
         ast_cli(a->fd, "No device is currently set as the active console device.\n");
      else {
         console_pvt_lock(pvt);
         ast_cli(a->fd, "The active console device is '%s'.\n", pvt->name);
         console_pvt_unlock(pvt);
         pvt = unref_pvt(pvt);
      }

      return CLI_SUCCESS;
   }

   if (!(pvt = find_pvt(a->argv[e->args]))) {
      ast_cli(a->fd, "Could not find a device called '%s'.\n", a->argv[e->args]);
      return CLI_FAILURE;
   }

   set_active(pvt, "yes");

   console_pvt_lock(pvt);
   ast_cli(a->fd, "The active console device has been set to '%s'\n", pvt->name);
   console_pvt_unlock(pvt);

   unref_pvt(pvt);

   return CLI_SUCCESS;
}

static struct ast_cli_entry cli_console[] = {
   AST_CLI_DEFINE(cli_console_dial,       "Dial an extension from the console"),
   AST_CLI_DEFINE(cli_console_hangup,     "Hangup a call on the console"),
   AST_CLI_DEFINE(cli_console_mute,       "Disable/Enable mic input"),
   AST_CLI_DEFINE(cli_console_answer,     "Answer an incoming console call"),
   AST_CLI_DEFINE(cli_console_sendtext,   "Send text to a connected party"),
   AST_CLI_DEFINE(cli_console_flash,      "Send a flash to the connected party"),
   AST_CLI_DEFINE(cli_console_autoanswer, "Turn autoanswer on or off"),
   AST_CLI_DEFINE(cli_list_available,     "List available devices"),
   AST_CLI_DEFINE(cli_list_devices,       "List configured devices"),
   AST_CLI_DEFINE(cli_console_active,     "View or Set the active console device"),
};

/*!
 * \brief Set default values for a pvt struct
 *
 * \note This function expects the pvt lock to be held.
 */
static void set_pvt_defaults(struct console_pvt *pvt)
{
   if (pvt == &globals) {
      ast_string_field_set(pvt, mohinterpret, "default");
      ast_string_field_set(pvt, context, "default");
      ast_string_field_set(pvt, exten, "s");
      ast_string_field_set(pvt, language, "");
      ast_string_field_set(pvt, cid_num, "");
      ast_string_field_set(pvt, cid_name, "");
      ast_string_field_set(pvt, parkinglot, "");
   
      pvt->overridecontext = 0;
      pvt->autoanswer = 0;
   } else {
      ast_mutex_lock(&globals_lock);

      ast_string_field_set(pvt, mohinterpret, globals.mohinterpret);
      ast_string_field_set(pvt, context, globals.context);
      ast_string_field_set(pvt, exten, globals.exten);
      ast_string_field_set(pvt, language, globals.language);
      ast_string_field_set(pvt, cid_num, globals.cid_num);
      ast_string_field_set(pvt, cid_name, globals.cid_name);
      ast_string_field_set(pvt, parkinglot, globals.parkinglot);

      pvt->overridecontext = globals.overridecontext;
      pvt->autoanswer = globals.autoanswer;

      ast_mutex_unlock(&globals_lock);
   }
}

static void store_callerid(struct console_pvt *pvt, const char *value)
{
   char cid_name[256];
   char cid_num[256];

   ast_callerid_split(value, cid_name, sizeof(cid_name), 
      cid_num, sizeof(cid_num));

   ast_string_field_set(pvt, cid_name, cid_name);
   ast_string_field_set(pvt, cid_num, cid_num);
}

/*!
 * \brief Store a configuration parameter in a pvt struct
 *
 * \note This function expects the pvt lock to be held.
 */
static void store_config_core(struct console_pvt *pvt, const char *var, const char *value)
{
   if (pvt == &globals && !ast_jb_read_conf(&global_jbconf, var, value))
      return;

   CV_START(var, value);

   CV_STRFIELD("context", pvt, context);
   CV_STRFIELD("extension", pvt, exten);
   CV_STRFIELD("mohinterpret", pvt, mohinterpret);
   CV_STRFIELD("language", pvt, language);
   CV_F("callerid", store_callerid(pvt, value));
   CV_BOOL("overridecontext", pvt->overridecontext);
   CV_BOOL("autoanswer", pvt->autoanswer);
   CV_STRFIELD("parkinglot", pvt, parkinglot);

   if (pvt != &globals) {
      CV_F("active", set_active(pvt, value))
      CV_STRFIELD("input_device", pvt, input_device);
      CV_STRFIELD("output_device", pvt, output_device);
   }

   ast_log(LOG_WARNING, "Unknown option '%s'\n", var);

   CV_END;
}

static void pvt_destructor(void *obj)
{
   struct console_pvt *pvt = obj;

   ast_string_field_free_memory(pvt);
}

static int init_pvt(struct console_pvt *pvt, const char *name)
{
   pvt->thread = AST_PTHREADT_NULL;

   if (ast_string_field_init(pvt, 32))
      return -1;

   ast_string_field_set(pvt, name, S_OR(name, ""));

   return 0;
}

static void build_device(struct ast_config *cfg, const char *name)
{
   struct ast_variable *v;
   struct console_pvt *pvt;
   int new = 0;

   if ((pvt = find_pvt(name))) {
      console_pvt_lock(pvt);
      set_pvt_defaults(pvt);
      pvt->destroy = 0;
   } else {
      if (!(pvt = ao2_alloc(sizeof(*pvt), pvt_destructor)))
         return;
      init_pvt(pvt, name);
      set_pvt_defaults(pvt);
      new = 1;
   }

   for (v = ast_variable_browse(cfg, name); v; v = v->next)
      store_config_core(pvt, v->name, v->value);

   if (new)
      ao2_link(pvts, pvt);
   else
      console_pvt_unlock(pvt);
   
   unref_pvt(pvt);
}

static int pvt_mark_destroy_cb(void *obj, void *arg, int flags)
{
   struct console_pvt *pvt = obj;
   pvt->destroy = 1;
   return 0;
}

static void destroy_pvts(void)
{
   struct ao2_iterator i;
   struct console_pvt *pvt;

   i = ao2_iterator_init(pvts, 0);
   while ((pvt = ao2_iterator_next(&i))) {
      if (pvt->destroy) {
         ao2_unlink(pvts, pvt);
         ast_rwlock_wrlock(&active_lock);
         if (active_pvt == pvt)
            active_pvt = unref_pvt(pvt);
         ast_rwlock_unlock(&active_lock);
      }
      unref_pvt(pvt);
   }
   ao2_iterator_destroy(&i);
}

/*!
 * \brief Load the configuration
 * \param reload if this was called due to a reload
 * \retval 0 success
 * \retval -1 failure
 */
static int load_config(int reload)
{
   struct ast_config *cfg;
   struct ast_variable *v;
   struct ast_flags config_flags = { 0 };
   char *context = NULL;

   /* default values */
   memcpy(&global_jbconf, &default_jbconf, sizeof(global_jbconf));
   ast_mutex_lock(&globals_lock);
   set_pvt_defaults(&globals);
   ast_mutex_unlock(&globals_lock);

   if (!(cfg = ast_config_load(config_file, config_flags))) {
      ast_log(LOG_NOTICE, "Unable to open configuration file %s!\n", config_file);
      return -1;
   } else if (cfg == CONFIG_STATUS_FILEINVALID) {
      ast_log(LOG_NOTICE, "Config file %s has an invalid format\n", config_file);
      return -1;
   }
   
   ao2_callback(pvts, OBJ_NODATA, pvt_mark_destroy_cb, NULL);

   ast_mutex_lock(&globals_lock);
   for (v = ast_variable_browse(cfg, "general"); v; v = v->next)
      store_config_core(&globals, v->name, v->value);
   ast_mutex_unlock(&globals_lock);

   while ((context = ast_category_browse(cfg, context))) {
      if (strcasecmp(context, "general"))
         build_device(cfg, context);
   }

   ast_config_destroy(cfg);

   destroy_pvts();

   return 0;
}

static int pvt_hash_cb(const void *obj, const int flags)
{
   const struct console_pvt *pvt = obj;

   return ast_str_case_hash(pvt->name);
}

static int pvt_cmp_cb(void *obj, void *arg, int flags)
{
   struct console_pvt *pvt = obj, *pvt2 = arg;

   return !strcasecmp(pvt->name, pvt2->name) ? CMP_MATCH | CMP_STOP : 0;
}

static void stop_streams(void)
{
   struct console_pvt *pvt;
   struct ao2_iterator i;

   i = ao2_iterator_init(pvts, 0);
   while ((pvt = ao2_iterator_next(&i))) {
      if (pvt->hookstate)
         stop_stream(pvt);
      unref_pvt(pvt);
   }
   ao2_iterator_destroy(&i);
}

static int unload_module(void)
{
   ast_channel_unregister(&console_tech);
   ast_cli_unregister_multiple(cli_console, ARRAY_LEN(cli_console));

   stop_streams();

   Pa_Terminate();

   /* Will unref all the pvts so they will get destroyed, too */
   ao2_ref(pvts, -1);

   pvt_destructor(&globals);

   return 0;
}

static int load_module(void)
{
   PaError res;

   init_pvt(&globals, NULL);

   if (!(pvts = ao2_container_alloc(NUM_PVT_BUCKETS, pvt_hash_cb, pvt_cmp_cb)))
      goto return_error;

   if (load_config(0))
      goto return_error;

   res = Pa_Initialize();
   if (res != paNoError) {
      ast_log(LOG_WARNING, "Failed to initialize audio system - (%d) %s\n",
         res, Pa_GetErrorText(res));
      goto return_error_pa_init;
   }

   if (ast_channel_register(&console_tech)) {
      ast_log(LOG_ERROR, "Unable to register channel type 'Console'\n");
      goto return_error_chan_reg;
   }

   if (ast_cli_register_multiple(cli_console, ARRAY_LEN(cli_console)))
      goto return_error_cli_reg;

   return AST_MODULE_LOAD_SUCCESS;

return_error_cli_reg:
   ast_cli_unregister_multiple(cli_console, ARRAY_LEN(cli_console));
return_error_chan_reg:
   ast_channel_unregister(&console_tech);
return_error_pa_init:
   Pa_Terminate();
return_error:
   if (pvts)
      ao2_ref(pvts, -1);
   pvts = NULL;
   pvt_destructor(&globals);

   return AST_MODULE_LOAD_DECLINE;
}

static int reload(void)
{
   return load_config(1);
}

AST_MODULE_INFO(ASTERISK_GPL_KEY, AST_MODFLAG_DEFAULT, "Console Channel Driver",
      .load = load_module,
      .unload = unload_module,
      .reload = reload,
);